STALKER SLING GUIDE
Everything you need to get your Stalker Sling ready to use and keep it working properly.
⚠️ Before attempting any installation or adjustment, you must always confirm your rifle is safe to handle. This involves dropping the magazine, ensuring the chamber is clear, and leaving the bolt/action open.
Stalker Sling
Set it up in six steps
About five minutes, no tools. Your QR swivels are already in the box.
-
Loosen the swivel
Back the screw off a quarter turn. No need to remove it fully.
-
Lock the swivels in
Clip the front and rear swivels onto your rifle or crossbow studs. Listen for the click.
-
Release the buckle
Unclip the quick-release buckle to open the strap.
-
Knot the strap around the bottleneck
Tie the strap around the bottleneck of the stock. That knot is what the strap locks into.
-
Attach the sling and close the release
Clip the Stalker Sling on and close the release buckle until it locks.
-
Adjust the buckles as shown
The marked spots are where the strap adjusts. Pull to tighten, lift to loosen, until it sits right on you.
Swivel replacement video
